Posted by Als454 on April 04, 04 at 14:54:30:
In Reply to: Axle ratios in RPO Codes? posted by Foy on April 04, 04 at 09:36:14:
An easy but not a clean way to do it is to pull the rear diff cover and look for the numbers on the ring gear. Such as 41 11 or 41 10 that would indicate 3.73's or 4.10's. If you can't find the numbers on the ring gear you can count the teeth on both the ring gear and pinion gear then divide the ring number by the pinion number.