Posted by Ben on July 08, 05 at 22:35:15:
Made a few more from a scrap of lumber.
This one is the "medium" sized. Larger is about 1.5 times this one. Smaller is about 75% of this one.
Rope is easier to use than a metal handle. Rope to eye-bolts on three sides and the back one has another rope with a S-hook to store hanging from the garage wall out of the way.
Nylon strap is from surplus and is to roll the tire onto so the chock won't move. It's screwed onto the bottom with a metal plate (store bought about 3"x6" and nail holes) that's underneath the rubber anti-skid.
Bottom is rubber matt from hardware store. Cut to size and customer didn't want it, so it's for cheap ($1.99 for a piece 2 foot x 3 foot).
That's a 1/2" drive breaker bar for size reference.
I like this both because fun/DIY and cheap. Lumber is free from construction left overs. Eye-bolt and metal plate cost around $2 bucks. Rope free found in neighbors trash (yeah, I go and get stuff if it looks interesting) and the screws are from my stock.