Posted by John Diehl on April 20, 03 at 10:20:40:
In Reply to: Wiper arm removal posted by danny on April 19, 03 at 14:58:37:
(from the on-line Chilton's manual - chassis electrical section)
Wiper Arm
See Figure 3
Before removing either or both of the wiper arm(s), mark their position on the windshield to indicate the proper park position. This will aid during installation.
Disconnect the washer hose.
Lift the wiper arm from the glass and pull the retaining latch.
Remove the wiper arm assembly.
To install:
Install the wiper arm onto the wiper motor driveshaft so that it will rest in the proper position when the wipers are turned off.
Lift the wiper arm extension and push in the retaining latch.
Connect the washer hose.
remove X when emailing