Posted by Maz on July 16, 03 at 07:35:14:
In Reply to: Re: 2002, how ro remove seat head rests, anybody? posted by AJ on July 16, 03 at 06:56:29:
Thanks for the tip, I'll try it tonight. The owner's manual should say "must carry tool box onboard at all times".
Speaking of owner's manual, I have a set of 3 button's below the overhead courtsey lights on the front, above the rear view mirror, that my manual says nothing about. Would you by any chance know what they are for?
Thanks again ... Maz
: If they are like my '01 Sub, you'll find a small hole on the plastic mounting base of each headrest post. I'm referring to the rectagular plastic piece at the top of the seatback, into which slide the headrest posts. You should see a small hole on the side of each plastic base. You'll need a stiff piece of wire that fits into the hole; I use a small allen wrench. Raise the headrest to its highest position. Then insert/press the wire into the hole, while pulling up on the headrest. It should release from the last detent and slide up slightly. Once you've done each of the 2 posts, the headrest just lift out of the seat.
: I too was surprised that better instructions weren't readily available, especially since the 2nd row seat doesn't fold down easily if the front seat if back on its track.