Posted by BigRig on May 23, 19100 at 19:29:47:
In Reply to: Re: Can I reprogram the keyless entry system myself? posted by CWMartin on May 23, 19100 at 19:12:01:
: Will the same procedure and connector pin selection work on the 2000 model Yukon?
No it won't, but the following will. This should work for all 2K Subs, Tahoes, Yukons, and Yukon XLs.
Transmitter Programming
1.Start with the ignition OFF, hold down the power unlock button on the door panel. Turn ignition key ON,
OFF, ON, OFF. Release power unlock button on the door panel. The locks will cycle once.
2.Hold down the keyless entry transmitter LOCK and UNLOCK buttons for 15 seconds. The locks will again
cycle once.
3.Repeat step #2 for each additional keyless entry transmitter.
4.Turn the ignition on to exit the keyless entry transmitter programming mode. Programming is now
complete.