Posted by Bill Lucas on June 27, 01 at 10:46:53:
In Reply to: Reprograming on 2K Suburbans, Tahoes, Yukons, and Yukon XLs posted by BigRig on May 23, 19100 at 19:29:47:
Will this procedure also work on a 98 Blazer?
Thanks, Bill
: : Will the same procedure and connector pin selection work on the 2000 model Yukon?
: No it won't, but the following will. This should work for all 2K Subs, Tahoes, Yukons, and Yukon XLs.
: Transmitter Programming
: 1.Start with the ignition OFF, hold down the power unlock button on the door panel. Turn ignition key ON,
: OFF, ON, OFF. Release power unlock button on the door panel. The locks will cycle once.
:
: 2.Hold down the keyless entry transmitter LOCK and UNLOCK buttons for 15 seconds. The locks will again
: cycle once.
:
: 3.Repeat step #2 for each additional keyless entry transmitter.
:
: 4.Turn the ignition on to exit the keyless entry transmitter programming mode. Programming is now
: complete.