Posted by ismo on December 01, 01 at 02:23:01:
In Reply to: Re: ismo...Actuator Brown Wire Dangling... posted by Rooster on November 30, 01 at 16:43:10:
Unfortunately the TSB I have doesn't include wiring schematic.
I removed the connector above the transfer case, and by voltage gauge I found 2 wires with +12 voltage. I just spliced the brown wire to one of them and now the actuator works. It was quite simple job, but because there was very little room to work, and the temperature was about 14F, I really do not want to repeat it !
Thank's for everybody for help and guidance.
Ismo